Preparing for the worst from hurricane season

Preparing for the worst from hurricane seasonHurricane season typically runs from June 1 to November 1 each year. Hurricanes can form anytime the conditions are right, but summer and fall are considered “prime time” for superstorms. Although many hurricanes fall to the southeast and through the Gulf of Mexico, New England isn’t immune from them. If a hurricane strikes, what should you do to protect your plumbing?

What to do before a hurricane

Shut off the water! If you evacuate, take a moment to shut off the main water valve to your home. You can also open your taps to help drain the pipes. If the storm damages pipes in your home, you can at least minimize any fresh-water flooding.

Check your sump pump. Your sump pump could save your home from serious flooding. Or not. An electric sump pump can’t bail you out if you lose power. If you have a generator, make sure your sump pump makes the list of must-have services. Some sump pumps can work without electricity. If flooding is a serious concern, or you often lose power during storms, consider installing a non-electric sump pump to keep the water moving.

Clear drains. If you have storm drains on or near your property, make sure they’re clear before the storm hits. The storm will bring a lot of debris along with it, and the drains may clog quickly and often. Starting with a clear drain, however, may help clear some early runoff and lessen flooding around your home.

What to do after a hurricane

Check your sump pump! After a storm, make sure your sump pump is still on duty. If it failed, get it replaced as quickly as possible.

Clear debris from storm drains. Keep storm drains clear on and around your property. This allows water to abate more quickly and lessens the likelihood of post-storm flooding. You may have to clear the drains several times following the storm.

Don’t turn your water on immediately. The storm may not have affected your plumbing directly, but the municipal water supply may have been contaminated. Wait until the water authority gives the all-clear to begin using your taps again.

Have your plumbing inspected. Major storms can cause the ground to shift, uproot trees and damage foundations. The added weight of the water also puts enormous pressure on underground pipes. This can cause severe problems for the plumbing inside and outside of your home. Following a hurricane, have your sewer pipe inspected for cracks, breaks and collapses. Also, look for signs of water leaks outside your home, including sinking ground, persistent puddles, and unusual “soft” spots. Leaks can also cause a loss of water pressure, the sound of running water, and cracks in driveways and foundations. New problems with dampness, mildew and mold growth, and high water bills are also symptoms of plumbing damage.

Look for toilet troubles. Hurricanes can dump a lot of dirt and debris into the sewer system, which can cause plumbing performance problems. If your toilets don’t flush as well as they did pre-storm, your sewer connection could be in trouble. The storm could have damaged the municipal sewers, which can set you up for backups and sanitary sewer overflows. If a sewer inspection of your pipes is clear, notify the municipality of your troubles.

One last piece of hurricane advice

Be patient! Plumbers are in high demand following major storms and hurricanes. It’s common for plumbers to be booked 24/7 in the immediate aftermath of a hurricane. Consider signing up for an emergency services contract. This agreement can ensure that you have preferred access to plumbing, heating, and cooling services around the clock.

Contact us at Boston Standard Company at (617) 288-2911 for your plumbing, heating, and cooling needs. We offer emergency service contracts for plumbing, heating, and cooling.

Photo Credit: Adam Pieniazek, via Flickr