Indoor plumbing is possibly the most influential invention of the modern world, and most of the time, it just works. But your plumbing does require maintenance at times. Many people don’t recognize the signs of a developing plumbing problem and get caught off guard by an unexpected repair. Here are a few trouble signs to look for.
Three reasons to call a plumber
Low water pressure. Low water pressure is a sign that something’s wrong with your water supply. Usually, “city water” arrives at your home under a lot of pressure. Municipal systems need higher pressure to ensure that the water get all the way to everyone’s taps. This means – if anything – that your water pressure should be on the high side.
When your water pressure is low, that’s a sign of trouble. If a nearby municipal supply line breaks, it will affect your water pressure. Contact your local water authority for further directions. The utility may instruct you to turn off your home’s main water valve while they’re repairing the break. Additionally, they may instruct you to boil drinking water to kill any harmful organisms that may have invaded the system. They may also ask you to open all of your taps once they’ve resolved the break to flush the lines.
If the municipal supply lines aren’t broken, then the trouble is in your pipes. Mineralization and corrosion inside your pipes and plumbing fixtures can reduce the overall flow of water to your taps. This is usually a condition that develops over a long period of time. Initially, you might not notice pressure or flow problems at all. If pressure problems affect only one particular tap, simply replace the affected fixture with a new one.
If all taps exhibit low pressure, you could have a major leak or your pipes could be corroding inside. Corrosion and mineral buildup reduce the diameter of the pipe and restrict water flow. These conditions can eventually completely seal a pipe. Mineral deposits can be dissolved, but corrosion is permanent damage, so you should replace the affected pipe.
Drains are a critical part of your plumbing system. A malfunctioning drain can pose a serious health and safety risk. Drains can clog for a number of reasons. Bacteria and organic films grow in your drains. As they accumulate, they can catch hair and other debris. Add a steady flow of soap residue, and you have the makings of a great clog. Chemical drain cleaners may dissolve a clog, but they can also damage your pipes. You can mechanically snake out the drain to remove the clog, or you can use enzymatic drain cleaners. Enzymatic drain cleaners literally eat the clog and clear the drain. You could also perform periodic drain maintenance by dumping a cup of baking soda down your drain, followed by a cup of vinegar. This combination will kill the organic growth in the drain and help keep it flowing freely.
Clogs aren’t the only problem you can encounter with a drain. Leaks (which are always bad), mineralization and corrosion can also slow or stop drains. In addition, chemicals you dispose of down the drain can damage them, and drains can also freeze. Breaks in your main drain can also cause sewage backups and spills, which are never pleasant. Powdered detergents can also reconstitute in drains, causing partial or complete blockages.
Most homeowners are well equipped to deal with a run-of-the-mill clog. Larger drain problems – like leaks, breaks, and non-organic blockages may require more tools and expertise to address!
Wet spots, peeling paint, buckling floors=plumbing leak
Plumbing leaks can occur anywhere, but they’re not always easy to find. Often the first sign of a leak is a water spot that appears on a wall, floor or ceiling. Leaks can be slow and steady, or they can cause floods. Leaking toilets can damage the surrounding floor. You may not notice this until the tile or floor covering gives way. Leaking fixtures in the shower or behind the wall can also cause a steady stream of water to escape. Over time, this water can promote mold growth and rot on walls and floors. Addressing the leak is Job #1. Once you’ve identified the leak and repaired it, cleaning up the damage comes next.
Leaks can be DIY repairs, depending on what’s actually leaking. If you have copper plumbing but you have no experience with soldering, you may want to call a plumber. The fire danger here is very real. The National Fire Prevention Association says that plumbing torches are one of the top ten causes of residential fires every year. In fact, nearly 30% of residential fires between 2010 and 2014 in the United States involved torches. About half of those fires started in the bathroom! Licensed plumbers are trained to solder in tight spaces. We also carry insurance that will protect you and your home from unnecessary risks.
If you’re experiencing any plumbing problems, we’re here to help. Call us at Boston Standard Company at (617) 288-2911. We’ll be happy to diagnose and repair your plumbing problems!
Photo Credit: IndyDina with Mr. Wonderful, via Flickr